Exhibitors

00% Water and Dust Resistant Nitrile Sealed Special Roller is a patented product of Akkayalar Conveyor.100% Water and Dust Resistant Nitrile Sealed Special Roll

Belt conveyor impact rollers are comprised from a conveyor roller whose main body is steel, rubber coated impact discs absorbing shock in various dimensions, fixed with support rings in order to prevent slide of discs from edges. Conveyor impact rollers normally are used for absorbing loads to be absorbed in the sections corresponding to bottom of return bottom and so increase of protection against damage and breakdown to be occurred in the material transported. Carrying roller should be suitable with its diameter so that it does not make fluctuation on belt. It is manufactured fitting tight on steel roller through a special machine. They are fitted side by side along rollerDiscs are manufactured,pressing in suitable moulds from black rubber, in hardness of 65 ±5 Shore A in accordance with DIN 53479 norm. Akkayalar Conveyor uses product of Ereğli (Turkey) steel.

Straight guidance conveyor pulleys also work in the manner stated above for loaded and empty straps. Lower and upper conveyor routing stations are fitted between upper and lower stations in system. 3 Group Lower&Upper Conveyor Routing Stations are manufactured in the same sizes and with the same design. Roller centre and station connection centres should be the same

The thing starting to move conveyor belt strap is conveyor drums. Conveyor drums fitted head of conveyor belt. In the event that conveyor belt length is long, vulcanized rubber coated drive drum more than one can be used in a belt plant. Good grabbing on body pipe of drum, rubber coating is made. It is with detachable shaft, connected to drum pipe via clamp system. DIN 2448 steel drawing pipes made in the thickness such as 0-15 mm, small diameter pipes from Ø600 mm with folding method in the thickness suitable for project from St 37,2 - St 52 quality iron sheet, product of Ereğli (Turkey), pipes with diameter of Ø600 mm and above are used. By giving taper of 1º per 3/2 on outer surfaces of drum pipes, trip, slide of belt will be prevented. Diameters of drum pipes changes between 220 mm and 1400 mm according to length and width of belt calculated as per load to be carried and surface width are between 400 mm and 3000 mm.

Ceramic-Coated Conveyor Drive and Tensioner Pulley, 3 year guarantee conveyor drums can be manufactured by Akkayalar Conveyor

In special projects that abrasion, rigidity, resistant to acid and magnetization or in the conveyors with similar properties,conveyor rollers made from polyamide or stainless steel material are used. Manufacturing of noncorrosive, polyamide,delrin, polyethylene and cestamide conveyor belt pulleys are made by us in suitable sizes according to your project and request. We can manufacture conveyor polyamide rollers according to your projects.

Elevator Drum for elevator conveyor systems. These tyoe of conveyor drum handling elevator buckets.